Pi^4 case Mk II

This is the Pi^4 case Mk II. It holds four Raspberry Pi side by side, hence the name - Pi to the power of four.

It has the Pi raised off the base so there is room for air to flow underneath. They are now screwed into the base to make them more secure. Two fans on the top provide lots of airflow to keep the temperatures down.

Click on the pictures to see the full-sized image.

Here is a picture with the top off. As you can see there is room for the power cables to plug into each Raspberry Pi.

And here is the reason for the delay in completing this project. The Raspberry Pi uses M2.5 screw holes so I had to obtain these screws which had to come via post.

Next I would like to see what can be done with the electrical side of things.